Page 1 of 1

'Boiler Relay' Comms Fault @ Same Time Each Day!

PostPosted: Tue Oct 20, 2020 9:27 am
by The EVOHOME Shop
If you are getting a "COMMS FAULT BOILER RELAY' message each day at the same time, ask yourself... 'Do I even have a 'Boiler Relay'? :?

If you are operating your Honeywell Home evohome and using it in S or Y Plan configuration (as per Pages 42 & 43 of the evohome Installation guide - https://heatingcontrols.honeywellhome.c ... lation.pdf) then you probably don't have a BDR91 setup as a 'Boiler Relay'. The only time we normally use a BDR91 as a 'Boiler Relay' is when you have evohome fitted to a Combi Boiler, or setup as a 'Figure 4' system (Page 43 of the evohome Installation Guide).

Therefore, in order to stop this message occurring you need to press & hold the 'SETTINGS' button for 3+ seconds, then go to 'INSTALLATION MENU' > 'BOILER/APPLIANCE CONTROL' > 'NONE' and press the GREEN TICK. This will stop evohome thinking it has a 'Boiler Relay' when one isn't present.

I hope that helps, I will produce a video to show how this is done shortly.