Honeywell evohome Unvented Cylinder Wiring Diagram

All Honeywell Home evohome general discussion in here! *PLEASE NOTE* Official Resideo technical support is on 0300 130 1299.
Post Reply
User avatar
Richard
Site Admin
Posts: 1188
Joined: Fri Jun 10, 2016 4:08 pm
Location: Mid Wales
Contact:
Contact Richard

Honeywell evohome Unvented Cylinder Wiring Diagram

Post by Richard »

This is a basic wiring diagram for wiring an 'unvented cylinder' with an evohome Hot Water Kit BDR91 wired to it.

The B & A terminals on the Unvented Cylinder may be labeled differently, so always consult the manufacturer's instructions for the supplied cylinder.

I hope that helps, but any questions please ask below.

Kind regards,

Richard
Attachments
Honeywell evohome bdr91 with unvented cylinder.png
Honeywell evohome bdr91 with unvented cylinder.png (77.91 KiB) Viewed 248 times
Home: 2012 Built Oak & Timber Frame Home (EPC Score 95 - A Rated)
Renewable Tech: GSHP, Solar Thermal, Solar PV & 20kWh Battery Storage
Smart Home Platform: Home Assistant, Shelly & Salus Smart Home
Top
iaingore
Posts: 4
Joined: Mon Sep 19, 2016 9:51 am

Re: Honeywell evohome Unvented Cylinder Wiring Diagram

Post by iaingore »

Thanks for this.
Top
Post Reply

Return to “Honeywell Home evohome”